View PDS1045-13_4993719.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PDS1045
10A SCHOTTKY BARRIER RECTIFIER PowerDI(R)5
Features
* * * * * * * Guard Ring Die Construction for Transient Protection Very Low Forward Voltage Drop High Forward Surge Current Capability For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications Lead Free Finish, RoHS Compliant (Note 1) "Green" Molding Compound (No Br, Sb) Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
* * * * * * Case: PowerDI 5 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin Annealed Over Copper Leadframe. Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 0.096 grams (approximate)
(R)
LEFT PIN RIGHT PIN
BOTTOMSIDE HEAT SINK
Top View
Bottom View
Note: Pins Left & Right must be electrically connected at the printed circuit board.
Ordering Information (Note 2)
Part Number PDS1045-13
Notes:
Case (R) PowerDI 5
Packaging 5000/Tape & Reel
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes. 2. For packaging details, go to our website at http://www.diodes.com.
Marking Information
S1045
YYWWK
S1045 = Product type marking code = Manufacturers' code marking YYWW = Date code marking YY = Last two digits of year (ex: 05 for 2005) WW = Week code (01 - 53) K = Factory designator
PowerDI is a registered trademark of Diodes Incorporated. 1 of 5 PDS1045
Document number: DS30539 Rev. 13 - 2
November 2010
(c) Diodes Incorporated
www.diodes.com
PDS1045
Maximum Ratings @TA = 25C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (see also Figure 4) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VR VR(RMS) IO IFSM Value 45 32 10 275 Unit V V A A
Thermal Characteristics
Characteristic Thermal Resistance Junction to Soldering Point Thermal Resistance Junction to Ambient Air (Note 3) TA = 25C Thermal Resistance Junction to Ambient Air (Note 4) TA = 25C Thermal Resistance Junction to Ambient Air (Note 5) TA = 25C Operating Junction Temperature Range VR 80% VRRM VR 50% VRRM Storage Temperature Range Symbol RJS RJA RJA RJA TJ TSTG Typ 85 65 50 -65 to +125 -65 to +150 -65 to +150 Max 0.8 Unit C/W C/W C/W C/W C C
Electrical Characteristics @TA = 25C unless otherwise specified
Characteristic Reverse Breakdown Voltage (Note 6) Forward Voltage Symbol V(BR)R VF Min 45 Typ 0.40 0.45 0.29 0.37 0.03 10 0.1 65 Max 0.45 0.51 0.35 0.43 0.3 25 0.6 150 Unit V V Test Condition IR = 600A IF = 5A, TS = 25C IF = 10A, TS = 25C IF = 5A, TS = 125C IF = 10A, TS = 125C TS = 25C, VR = 35V TS = 100C, VR = 35V TS = 25C, VR = 45V TS = 125C, VR = 45V
Reverse Leakage Current (Note 6)
IR
mA
Notes:
3. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com. 4. Polyimide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com. 5. Polyimide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm. 6. Short duration pulse test used to minimize self-heating effect. 7. Polyimide PCB, 2 oz. Copper. Cathode pad dimensions 16.0mm x 12.4mm. Anode pad dimensions 4.7mm x 2.7mm. 8. Devices mounted such that RJA @ 19C/W.
PowerDI is a registered trademark of Diodes Incorporated. 2 of 5 PDS1045
Document number: DS30539 Rev. 13 - 2
November 2010
(c) Diodes Incorporated
www.diodes.com
PDS1045
IF, INSTANTANEOUS FORWARD CURRENT (A)
0 6 9 12 15 3 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation
TJ = 125C
6.0
100 10 1
PD, POWER DISSIPATION (W)
4.5
100m 10m 1m
3.0
1.5
0
VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics
IR, INSTANTANEOUS REVERSE CURRENT (A)
TJ = 85C
TJ = 25C
TJ = -65C
CT, TOTAL CAPACITANCE (pF) 100
0
30 15 45 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics
0
10 20 30 VR, DC REVERSE VOLTAGE (V) Fig. 4 Total Capacitance vs. Reverse Voltage
12.5 TA, DERATED AMBIENT TEMPERATURE (C) IF(AV), AVERAGE FORWARD CURRENT (A)
200 180 160 140 120 100 80 60 40 20 0 0 5 10 15 20 25 30 35 40 VR, DC REVERSE VOLTAGE (V) Fig. 6 Operating Temperature Derating 45
10.0
7.5
5.0
2.5
0 0 75 25 50 100 125 150 TA, AMBIENT TEMPERATURE (C) Fig. 5 Forward Current Derating Curve 175
PowerDI is a registered trademark of Diodes Incorporated. 3 of 5 PDS1045
Document number: DS30539 Rev. 13 - 2
November 2010
(c) Diodes Incorporated
www.diodes.com
PDS1045
Package Outline Dimensions
A D b2 A2 D2
L
E
E1
E2
W L1 e b1 b1 A2
PowerDI 5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm
(R)
Suggested Pad Layout
X
Y
Dimensions C G X X1 Y Y1
X1 (2x) G
Value (in mm) 1.840 0.852 3.360 1.390 4.860 1.400
Y1 (2x) C
PowerDI is a registered trademark of Diodes Incorporated. 4 of 5 PDS1045
Document number: DS30539 Rev. 13 - 2
November 2010
(c) Diodes Incorporated
www.diodes.com
PDS1045
IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2010, Diodes Incorporated www.diodes.com
PowerDI is a registered trademark of Diodes Incorporated. 5 of 5 PDS1045
Document number: DS30539 Rev. 13 - 2
November 2010
(c) Diodes Incorporated
www.diodes.com

▲Up To Search▲

Price & Availability of PDS1045-13

	To Download PDS1045-13 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .